Click on the link below to go to the Gasco website. This will have tools to size a regulator for your application. Again, as always, give us a call if you need additional help or click Regulator sizing request and request technical support- gas regulator sizing.

Regulator Sizing Request

Gasco Regulator Sizing Tool

Remember to allow enough "straight pipe" into and out of the regulator. 5 to 8-pipe diameters UP-STREAM and 10-pipe diameters DOWN-STREAM.

example:

2" gas pipe should have 10 to 16" of straight pipe INTO and 20" of pipe OUT OF the regulator. 

* Include a tee to measure downstream regulated pressure.