9
Adjusting the blower trim (or airflow trim) on a Daikin One+ thermostat is an advanced setting typically found in the Installer Menu. This allows you to fine-tune the fan speed for cooling or heating to better manage humidity or noise.
Accessing the Blower Trim Settings
-
Enter Dealer Mode: From the home screen, tap the Menu icon (top left). Press and hold the Installer Edit or Dealer Edit button for about 5 seconds to unlock the restricted settings.
-
Go to Equipment Setup: Select Equipment Setup and then navigate to the Indoor Unit (Furnace or Air Handler) section.
-
Locate Airflow Trim: Look for a tab or menu labeled Cool Settings or Heat Settings. Inside these, you will find the Cool Airflow Trim or Heat Airflow Trim options.
-
Adjust the Trim: You can typically adjust the trim for different stages (Low, Intermediate, and High speed).
-
Increasing the trim (+): Increases airflow (CFM), which can help if the air feels weak but may reduce dehumidification.
-
Decreasing the trim (-): Decreases airflow, which is often done to increase "hang time" over the coils for better dehumidification.
-
-
Save and Exit: Ensure you tap Continue or Save through the screens to apply the changes.
Important Considerations
-
System Profiles: Some Daikin systems use Cooling Profiles (A, B, C, or D) which automatically adjust blower behavior. Changing the trim manually will override these defaults.
-
Professional Calibration: Daikin recommends that only trained personnel perform these adjustments, as improper airflow can lead to frozen coils or reduced equipment lifespan.
